Public Properties
| Name | Description | |
|---|---|---|
|
Code | G-Code itself, one has to call CreateCode before it |
|
|
CommentsTurnOn | Turn on/off comments |
|
|
DecimalSeparator | Sets the symbol to separate the integer part from the fractional part of the coordinates |
|
|
Delay | Sets the delay after each entity (0 if not required) |
|
|
DepartureOnZ | Tool lift height during idle run (MillMachine mode only) |
|
|
DepthOnZ | Tool downing depth (MillMachine mode only) |
|
|
EndCommand | Sets the end command |
|
|
EntityLayerComment | Set entities layer comment. First you must set property CommentsTurnOn into true |
|
|
FeedOnXY | Feed rate along X |
|
|
FeedOnZ | Feed rate along Z (MillMachine mode only) |
|
|
Image | Image on the basis of which G-Code is created |
|
|
LaserPower | |
|
|
MachineType | Sets the machine type (Mill by default) |
|
|
Precision | Precision of the coordinates – number of digits after comma (0 to 15) |
|
|
SpindleSpeed | Sets the speed of the spindle rotation (MillMachine mode only) |
|
|
StartCommand | Sets the start command |
|
|
ToolOffCommand | Sets the command to turn the tool off (for CutMachine only) |
|
|
ToolOnCommand | Sets the command to turn the tool on (for CutMachine only) |
|
|
UseIJNotationForArcs | Setting the circular interpolation using IJ or R |
|
|
UseLaserPower | |
|
|
ZeroPointID | |
|
|
ZeroPointOffset |
See Also
