CADtoGCode Members

	Name	Description
	CADtoGCode	Initializes a new instance of the CADtoGCode class

	Name	Description
	Code	G-Code itself, one has to call CreateCode before it
	CommentsTurnOn	Turn on/off comments
	DecimalSeparator	Sets the symbol to separate the integer part from the fractional part of the coordinates
	Delay	Sets the delay after each entity (0 if not required)
	DepartureOnZ	Tool lift height during idle run (MillMachine mode only)
	DepthOnZ	Tool downing depth (MillMachine mode only)
	EndCommand	Sets the end command
	EntityLayerComment	Set entities layer comment. First you must set property CommentsTurnOn into true
	FeedOnXY	Feed rate along X
	FeedOnZ	Feed rate along Z (MillMachine mode only)
	Image	Image on the basis of which G-Code is created
	LaserPower
	MachineType	Sets the machine type (Mill by default)
	Precision	Precision of the coordinates – number of digits after comma (0 to 15)
	SpindleSpeed	Sets the speed of the spindle rotation (MillMachine mode only)
	StartCommand	Sets the start command
	ToolOffCommand	Sets the command to turn the tool off (for CutMachine only)
	ToolOnCommand	Sets the command to turn the tool on (for CutMachine only)
	UseIJNotationForArcs	Setting the circular interpolation using IJ or R
	UseLaserPower
	ZeroPointID
	ZeroPointOffset

	Name	Description
	CreateCode	Creates G-Code
	Equals	(Overloaded) (inherited from Object).
	GetHashCode	(inherited from Object).
	GetType	(inherited from Object).
	ReferenceEquals	(inherited from Object).
	ToString	(inherited from Object).

Public Constructors